Nozzles

Type

Sprayer components

Nozzles

Type

Sprayer components

Standard Flat Fan nozzles

All-round flat fan nozzle. Recommended for all types of pesticide application where optimum coverage is demanded. This nozzle will give you excellent and uniform liquid distribution at boom heights from 14 to 28 in. (20 in. recommended to take care of uneven terrain or boom movements).

  • ISO: Flow, color and outer dimensions
  • Working pressure: 20 to 70 psi
  • Recommended for TWIN sprayers
  • SYNTAL – precision moulded thermoplastic
  • CERAMIC – extremely high durability
  • COLOR TIPS – for safe and easy handling
nozzles-field-sprayers-flat-fan.jpg

LowDrift nozzles

LowDrift nozzles are recommended when optimum spraying conditions cannot be achieved (risk of drift) and spraying cannot be postponed.

  • ISO: Flow, color and outer dimensions
  • Working pressure: 20 to 70 psi
  • Restrictor designed for minimum chemical residues
  • SYNTAL – precision moulded thermoplastic
  • CERAMIC – extremely high durability
  • COLOR TIPS – for safe and easy handling

This nozzle will give you excellent and uniform liquid distribution at boom heights from 14 to 28 in. (20 in. recommended to take care of uneven terrain or boom movements).

nozzles-field-sprayers-lowdrift.jpg

MINIDRIFT nozzles

The HARDI MINIDRIFT nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.

  • Air inclusion nozzle
  • Working pressure: 20 to 80 psi
  • ISO flow, colors, sizes and nomenclature
  • Application rates from 6 to 40 gpa (at 5 mph)
  • SYNTAL – precision moulded thermoplastic

This nozzle will give you excellent and uniform liquid distribution at boom heights from 16 to 35 in. The droplet spectrum is coarse to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The venturi can easily be removed for cleaning the nozzle.

nozzles-field-sprayers-minidrift.jpg

MINIDRIFT DUO

The HARDI MINIDRIFT DUO nozzle can be used for spraying at sub-optimal weather conditions, when spraying cannot be postponed. The MINIDRIFT nozzle will at low pressures reduce drift to a minimum.

  • Working pressure: 20 to 80 psi
  • ISO flow, colors, sizes and nomenclature
  • 30° forward and backward angle
  • Application rates from 7 to 35 gps (at 6 mph)
  • SYNTAL – precision moulded thermoplastic

This compact flat spray air-injector nozzle offers droplet spectrum from medium to very coarse; safe for drift control but without risking poor coverage and deposition on leaves. The two angled fans increase the number of droplets and impacts on target compared to normal air injector nozzles. This improves the coverage on dense foliage and vertical targets. The injector can easiily be removed for cleaning the nozzle.

nozzles-field-sprayers-minidrift-duo.jpg

INJET nozzles

The HARDI INJET nozzles can be used for spraying at sub-optimal weather conditions, or when spraying cannot be postponed. The HARDI INJET nozzles are recommended for most pesticide applications where reduced risk of drift is demanded.

  • Air inclusion nozzles with greater drift reduction
  • ISO flow, colors and nomenclature
  • Application rates from 3 to fo gpa (at 10 mph)
  • Pressure range: 40 to 140 psi
  • B-Jet border nozzle for precise application near sensitive areas
  • Available in SYNTAL and CERAMIC materials

The HARDI INJET & B-JET nozzles can be mounted using the 334083 ISO/INJET cap.

nozzles-field-sprayers-injet.jpg

QUINTASTREAM nozzles

Five [5] streams of liquid are distributed at different angles and flows by each Quintastream nozzle. Highest flow is from the middle stream and lowest in the outer, overlapping streams. HARDI QUINTASTREAM can be mounted using the filter casing without gasket (725737).

  • The fastest way to convert your sprayer into a high precision fertilizer applicator
  • 5 solid streams that minimise crop scorching
  • Particularly important for wide booms at fast speeds
  • ISO standard for easy calibration
  • Turn and Clean key for restrictor removal
  • Boom height 14 to 39 in.

Uniquely, this - patent pending - system allows for boom movements that do not influence distribution.

nozzles-field-sprayers-quintastream.jpg

F-80 Flat fan nozzles

This nozzle has an 80° spray angle. On boom sizes from 80 132 ft. boom height is often higher than 20 in. above the target. 80° nozzles provide good coverage with reduced drift risk at these higher boom heights and are also adaptable to band spraying.

  • ISO: Flow, color and outer dimensions
  • 80° spray angle
  • Working pressure: 20 to 70 psi
  • SYNTAL – precision moulded thermoplastic
  • CERAMIC - extremely high durability

The 80° nozzle is suitable for big booms or row crop / band spraying with either low boom or nozzles at droplegs. 

nozzles-field-sprayers-flat-spray.jpg

DUOCAP nozzles

HARDI DUOCAP gives you higher volume rate while still maintaining proper droplet size. Fitted with two Flat Fan or LowDrift nozzles HARDI DUOCAP will give Fine to Medium spray, suitable for fungicide spraying. Two different nozzles can be used.A Standard and a MINIDRIFT nozzle will give you the dual benefit of having fine droplets that ensures good coverage in the top of the crop and Coarse droplets that penetrates to the lower and more dense areas.

HARDI DUOCAP fitted with two MINIDRIFT nozzles will give superior penetration into dense crops like Potatoes and Soybeans.

Double-up your application

  • Improved coverage
  • Angled spray ensures penetration i dense crops
  • Can hold all ISO nozzles
  • 30° forward and backward angle
nozzles-field-sprayers-duocap.jpg

Large drop flat spray nozzles

HARDI foam nozzles are excellent for application of liquid fertilizers. Choose foam nozzles for broad leaf application - the large air inclusion bubbles will be reflected on the leaves and minimize crop damage.

The nozzle is used in combination with the 1553 Solid Stream nozzle.

  • Spray angle up to 150°
  • Extremely coarse droplet spectrum
  • Can work at nozzle spacing up to 40 in.
nozzles-field-sprayers-large-drop-flat-spray.jpg

Cone nozzles

HARDI 1553 Cone nozzles are used without swirl plates for solid stream and with swirl plates for hollow cone and full cone spraying.

Use the solid stream for liquid fertilizer on boom sprayers.

  • For application of liquid fertilizer at 10 in. nozzle spacing, with a minimum risk of scorching
  • Flow rates from 0.077 to 8.27 gpm (at 15 to 360 psi)
  • SYNTAL – precision moulded thermoplastic: precise, resistant and durable  
nozzles-field-sprayers-solid-stream.jpg